Vespa Sidecar Fitting Instructions

Vespa Sidecar fitting instructions

Please see more information of Vespa Sidecar

We have made our sidecar easy to install yet strong.

Our sidecar are easily fitted with only 4 screws. It is also removable with the 4 screws. Yet the connecting plate is very strong to carry heavy load.

Any workshop/service can install/fit the sidecar for you with the following instructions. If you have any trouble, you can video call with whatsapp with our mechanic to help in the installation.

If you are in Indonesia, just point out which is your nearest Vespa dealer and we will communicate with them to install for you.

The sidecar we shipped has already been fitted to the frame for easy fitment

You will receive your cargo Sidecar with 4 separate parts:

Sidecar capsule is already attached to frame for simple fitment
Windshield Acrylic
Wheels already fitted with tyre
Connecting Plate (underframe)

Here are some photos of our packing for export

Remove all the bubble wrap and cardboard wrap to see everything inside

You will find:

Screws on the connecting plate that are used to fit the plate to your Vespa
There are 4 screws to screw onto your Vespa unit
You may need to drill some holes for the screws. We try to use existing holes but some Vespa may not have the holes so you have to drill them.
Follow the screws/holes on the connecting plate
The plate should fit perfectly to your Vespa as we tailor it to each type of Vespa and tested it on our own Vespa before shipping to you.
The keys to your compartment is attached inside the compartment

Fitting the Sidecar

Please enlarge the photos if you need to:

First check out the holes of the connecting plate, There are 3 holes with screws provided to screw from the underside of your Vespa.
To access the holes, open up the foot area of your Vespa (remove the battery)
Screw onto hole no. 1,2,3 (if there are no holes, drill the holes based on the holes of the connecting plate)
The fourth screw goes on the side of the Vespa (no.4)

vespa sidecar fitting — **3 screws underside of the connecting plate**

Adjusting the angle of the Sidecar

Screw this adjuster from connecting plate with frame of sidecar
You can turn this and adjust the angle of the sidecar

vespa sidecar adjust — **adjuster for your sidecar, turn the adjuster**

adjusting sidecar angle — **Adjust sidecar to point the wheel towards your Vespa**

Note: Adjust your sidecar wheel to point towards your Vespa

NB: Picture is top view of sidecar (left sidecar)

This is a general setting, tuning of your sidecar, of course you can adjust towards your own liking

If your sidecar is on the left (as in picture) adjust the wheel to point right (towards your Vespa)
If your sidecar is on the right, adjust the wheel to point left (towards your Vespa)

Note: Adjust your Vespa unit away from your sidecar

NB: Picture is view from the back of your Vespa (left sidecar)

For left sidecar (as in picture) adjust your Vespa unit at 3.5″ angle away from your sidecar to the right
For right sidecar, adjust your Vespa unit at 3.5″ angle away from your sidecar to the left

This is a general setting, tuning of your sidecar, of course you can adjust towards your own liking

Now you are done!